================== Custom Apps How-to ================== NuttX comes with a large number of Apps but, most likely, you will want to add your own. There are various different options for this depending on your requirements. #. Replace the apps/ directory completely #. Extend the apps/ directory to include a new custom directory #. Include an additional custom directory outside of the main source trees The following sections explain these 3 methods using a ``CustomHello.c`` app and the directory ``CustomApps`` as an example. .. Tip:: If you make errors while setting this up and the build fails, it is most likely you'll need to run ``make clean`` and possibly even ``make distclean`` before rebuilding to ensure it works correctly. 1. Replace The Apps/ Directory Completely ========================================= The CustomApps directory need only to contain the minimum three files: * ``Makefile`` * ``Kconfig`` * ``CustomHello.c`` 1.1 Makefile ------------ The custom application directory must include a Makefile to make all of the targets expected by the NuttX build and must generate an archive called libapps.a in the top-level of the custom directory structure. The Makefile has just those minimum required targets: .. code-block:: console APPDIR = ${shell pwd} -include $(TOPDIR)/Make.defs # files CSRCS = CustomHello.c COBJS = CustomHello.o ROOTDEPPATH = --dep-path . # Build targets all: libapps.a .PHONY: dirlinks context preconfig depend clean clean_context distclean .PRECIOUS: libapps$(LIBEXT) # Compile C Files $(COBJS): %$(OBJEXT): %.c $(call COMPILE, $<, $@) # Add object files to the apps archive libapps.a: $(COBJS) $(call ARCHIVE, libapps.a, $(COBJS)) # Create directory links dirlinks: # Setup any special pre-build context context: # Setup any special pre-configuration context preconfig: # Make the dependency file, Make.deps depend: Makefile $(CSRCS) $(Q) $(MKDEP) $(ROOTDEPPATH) "$(CC)" -- $(CFLAGS) -- $(SRCS) > Make.dep # Clean the results of the last build clean: $(call CLEAN) # Remove the build context and directory links clean_context: # Restore the directory to its original state distclean: clean clean_context $(call DELFILE, Make.dep) # Include dependencies -include Make.dep 1.2 Kconfig ----------- A Kconfig file must be included but need not be populated with any meaningful options. This is a place where you can add settings to generate customized builds of your custom application and/or choose which of your apps to include. In the minimum case, Kconfig is only: .. code-block:: console # For a description of the syntax of this configuration file, # see the file kconfig-language.txt in the NuttX tools repository. # but it is more usual to include at least the basic information any NuttX app requires, as well as anything else your app may need: .. code-block:: console # For a description of the syntax of this configuration file, # see the file kconfig-language.txt in the NuttX tools repository. # config CUSTOM_APPS_MY_APP tristate "My App" default n ---help--- Enable My App if CUSTOM_APPS_MY_APP config CUSTOM_APPS_MY_APP_PROGNAME string "Program name" default "myapp" ---help--- This is the name of the program that will be used when the NSH ELF program is installed. config CUSTOM_APPS_MY_APP_PRIORITY int "My App task priority" default 100 config CUSTOM_APPS_MY_APP_STACKSIZE int "My App stack size" default DEFAULT_TASK_STACKSIZE endif 1.3 CustomHello.c ----------------- The custom application must actually compile some source files in order to generate the required libapps.a archive. One of these source files must include the ``main()`` entry point to the application. The function of this main() entry point simply to bring-up the full application. It is called at the completion of OS initialization. What this application initialization entry point does, how it interacts with the rest of your application, and where the rest of you application code is located is of no concern to the OS. Only this one entry point is needed. For this "Hello, Custom World!" application ``custom_hello()`` is the application entry point: .. code-block:: console #include int custom_hello(int argc, char *argv[]) { printf("Hello, Custom World!!\n"); return 0; } 1.4 Building with the CustomApps Directory ------------------------------------------ In order to build with the new custom configuration, you will need the following in your configuration: :menuselection:`CONFIG_APPS_DIR="../CustomApps"` :menuselection:`CONFIG_INIT_ENTRYPOINT="custom_hello"` Note that you can only access the ``../CustomApps/Kconfig`` configuration file if ``CONFIG_APPS_DIR`` is set to ``../CustomApps`` BEFORE ``make menuconfig`` is executed This can be done by * hand-editing the .config file before running make menuconfig, which is rarely a good idea * Using ``kconfig-tweak --set-str CONFIG_APPS_DIR ../CustomApps`` * select the CustomApps directory as a command line option at the time the board is configured: .. code-block:: console ./tools/configure.sh -a ../CustomApps : or .. code-block:: console .tools/configure.sh -l ../CustomBoards/MyCustomBoardName/MyCustomConfig Then build as you normally would. When you execute the custom_hello app you should see: .. code-block:: console Hello, Custom World!! 2. Extend the apps/ directory to include a new custom directory =============================================================== The collection of apps provided in nuttx-apps can be useful, and this method simply extends the directory structure to include your own directory structure. The existing /apps makefile automatically checks for the existence of sub-directories that contain a ``Makefile`` and ``Make.defs`` file. This example assumes there is likely to be more than one custom app, and includes a ``Kconfig`` for the app itself. Inclusion of a ``Kconfig`` allows custom App options to be included in the NuttX configuration system, but is optional. 2.1 Custom Apps Directory ------------------------- Simply create a new directory under the existing apps directory with a name of your choice. This example uses the directory name ``CustomApps``. 2.2 Make.defs ------------- Create this file in the ``CustomApps`` directory, with the following line added: .. code-block:: console include $(wildcard $(APPDIR)/CustomApps/*/Make.defs) 2.3 Makefile ------------ Create a Makefile in the ``CustomApps`` directory, with the following lines added: .. code-block:: console MENUDESC = "Custom Apps" include $(APPDIR)/Directory.mk 2.4 CustomHello App ------------------- Create a sub-directory under the ``CustomApps`` directory called ``CustomHello``. The same ``CustomHello.c`` file as described above should be created here. 2.5 CustomHello Make.defs ------------------------- Create a Make.defs in the ``CustomApps/CustomHello`` directory with the following lines: .. code-block:: console ifneq ($(CONFIG_CUSTOM_APPS_CUSTOM_HELLO),) CONFIGURED_APPS += $(APPDIR)/CustomApps/CustomHello endif 2.6 CustomHello Makefile ------------------------ Create a Makefile in the ``CustomApps/CustomHello`` directory with the following lines: .. code-block:: console include $(APPDIR)/Make.defs # Custom Hello built-in application info PROGNAME = $(CONFIG_CUSTOM_APPS_CUSTOM_HELLO_PROGNAME) PRIORITY = $(CONFIG_CUSTOM_APPS_CUSTOM_HELLO_PRIORITY) STACKSIZE = $(CONFIG_CUSTOM_APPS_CUSTOM_HELLO_STACKSIZE) MODULE = $(CONFIG_CUSTOM_APPS_CUSTOM_HELLO) # Custom Hello MAINSRC = CustomHello.c include $(APPDIR)/Application.mk 2.7 CustomHello Kconfig ----------------------- Create a Kconfig file in the ``CustomApps/CustomHello`` directory, with the following lines. For the purposes of this example, the Kconfig will only cover our single application): .. code-block:: console # # For a description of the syntax of this configuration file, # see the file kconfig-language.txt in the NuttX tools repository. # config CUSTOM_APPS_CUSTOM_HELLO tristate "Custom Hello App" default n ---help--- Enable the Custom Hello App if CUSTOM_APPS_CUSTOM_HELLO config CUSTOM_APPS_CUSTOM_HELLO_PROGNAME string "Program name" default "custom_hello" ---help--- This is the name of the program that will be used when the NSH ELF program is installed. config CUSTOM_APPS_CUSTOM_HELLO_PRIORITY int "Custom Hello task priority" default 100 config CUSTOM_APPS_CUSTOM_HELLO_STACKSIZE int "Custom Hello stack size" default DEFAULT_TASK_STACKSIZE endif 2.8 Build and Run ----------------- Once these files have been created, run a ``make clean`` (you may need to run ``make distclean`` followed by ``make menuconfig``. If successful there will be new Kconfig entries. :menuselection:`Application Configuraration --> Custom Apps --> Custom Hello App` Select the ``Custom Hello App`` and run the usual build process. If successful you can run the newly included ``custom_hello`` app. 3. Include an Additional Custom directory Outside of the Main Source Trees ========================================================================== Thia is similar to the previous approach, but places the ``CustomApps`` directory outside of the default trees. 3.1 Create Custom Apps directory and a Symbolic Link ---------------------------------------------------- Create a directory for the custom apps in a location of your choosing. Then create A symbolic link in the main nuttx/apps directory. This example assumes this has been placed below the top NuttX folder, alongside the default ``apps`` directory, i.e. ``nuttx/CustomApps`` .. code-block:: console $ pwd /home/nuttx $ ls -1 apps CustomBoards nuttx $ mkdir CustomApps $ ls -1 apps CustomApps CustomBoards nuttx $ cd apps $ ln -s ../CustomApps CustomApps 3.2 Make.defs etc. ------------------ Follow all the steps as in sections 2.2 to 2.7 above, creating the exact same files but placing then in the new ``CustomApps`` directory location created as described here.