Apache NuttX-12.6.0 Release Notes

What’s New In This Release Major Changes to Core OS Sched

  • #12404 nuttx/arch.h: Update parameter type to match definition.
  • #12464 Revert “sched: replace some global variables to macro”
  • #12175 sched: Move dump.c to sched_dumponexit.c
  • #12376 sched: remove g_cpu_schedlock g_cpu_irqsetlock g_cpu_locksetlock
  • #12377 sched: remove redundant variables “switched”
  • #12031 sched: SMP: Fix issues of return values of nxsched_add_readytorun()
  • #12140 sched_lock: we can remove these sched_lock,
  • #12009 sched/environ: Improve performance of set/unset environment
  • #12114 sched/irq: irq_cpu_locked can be remove
  • #12115 sched/irq: remove scheduling check in csection
  • #11973 sched/irq: spinlock should not depends on SMP
  • #12427 sched/kconfig: add PID_INITIAL_LENGTH
  • #12179 sched/Kconfig: make disable idle loop configurable
  • #12434 sched/Kconfig: waitpid() depends on SCHED_HAVE_PARENT if BUILD_KERNEL
  • #12316 sched/misc: dump stack as platform bit width
  • #12319 sched/mqueue: add support of tick based send() and receive()
  • #12126 sched/mqueue: correct list parameter
  • #12001 sched/mqueue: merge System-V message queue initialize into posix
  • #12402 sched/mqueue: reclaim unsent message
  • #12315 sched/posixspawn: disable tedious logging
  • #12106 sched/pthread: detached thread should destroy the join info
  • #12314 sched/pthread: pthread_join null pointer
  • #12388 sched/pthread: rename pthread_initialize.c
  • #12462 sched/pthread: simplify pthread_create() branch logic
  • #12282 sched/sched: CONFIG_SCHED_RESUMESCHEDULER macro define error
  • #12284 sched/sched: Simplify the scheduling logic in nxsched_add_readytorun() for SMP
  • #12141 sched/sched: There is no need to use sched_[un]lock
  • #11997 sched/signal: add sanity check for siginfo
  • #12380 sched/signal: fix deadlock when sigdeliver call enter_critical_section
  • #12432 sched/signal: move signal structures pool to bss
  • #12406 sched/signal: reclaim sigaction
  • #12302 sched/task: minor revision on task_init.c
  • #12320 sched/tcb: use shared group for kthreads
  • #12285 sched/tee: In tee, we need to disable the IRQ interrupt to make the A core policy consistent with the M core.
  • #12412 sched/tls: fix build error under CONFIG_PTHREAD_ATFORK enabled
  • #12113 sched/timer: use spin_lock_irqsave protect g_alloctimers
  • #12142 sched/wqueue: There is no need to use sched_[un]lock
  • #12079 stack: update up_get_intstackbase API to support cpu id mm
  • #12449 mm: check double free before adding to delaylist
  • #12467 mm: fix mm_curused calculate err
  • #12541 mm: seperate mm_pool and mm_pool init
  • #12041 mm/arch: user-space device mapping support
  • #12445 mm/gran: Fix GRAN_ALIGNED() macro
  • #12095 mm/gran: remove size limitation
  • #12224 mm/iob: Support alloc IOB via malloc
  • #12124 mm/map: minor reformating vm_region.c
  • #12040 mm/map.h: polish field defs/comments libc
  • #12230 Basic locale support for C++ (libstdc++)
  • #12422 Fixes for symbol definition in libc.csv and syscall.csv
  • #12158 libc: add support for reallocarray
  • #12168 libc.csv: Fix macro guard for TLS related symbols
  • #12297 libc/lib_bzero:Add bzero prototype.
  • #12112 libs/libc/fdcheck: update fdcheck impl
  • #12263 libc/string: replace __builtin_ffsl with inline function
  • #12451 libc/sem_open: return error code, sem returned by parameter
  • #12426 libs/libc/gdbstub:fix get thread rsp command crash
  • #12211 libs/libc/inttypes: add support for imaxdiv tools
  • #12087 Adjust the apps/benchmarks directory and add some new Profile tools
  • #12231 tools: Extend default appdir list.
  • #12137 tools/configure.sh: list confs by board
  • #12195 tools/configure.sh: revise help message
  • #12363 tools/minidump: 64-bit dump support
  • #12010 tools/minidump: support multiple ELF files
  • #12469 tools/minidumpserver: fix 32bit crash log parsing
  • #12153 tools/uncrustify: disable leading space removal for block comment various
  • #12439 Kconfig: move LTO options to Build Setup menu
  • #12045 all: Fix accessing uninitialized local variables
  • #12492 compiler: fix build break on niche platform
  • #12354 include: Add missing c symbols to std namespace
  • #12303 include: When defining NDEBUG, assert will implement alignment standards
  • #12075 include/nuttx/timers/pwm.h: add dcpol attribute to pwm_chan_s
  • #12343 include/sys/socket.h: add the definition of SCM_TIMESTAMP
  • #12529 include/unistd.h: Adds some posix supported definitions Changes to the Build System
  • #12171 boards/stm32: Add ds1307 to CMake build
  • #12270 cmake: bugfix KERNEL should not be defined with FLAT mode in libc, mm etc.
  • #12423 cmake:bugfix CMake compilation options settings should not use strings
  • #12237 cmake: bugfix generate config.h contain ; characters will be handled incorrectly
  • #12173 cmake: fix a few bugs during use CMake build
  • #12035 cmake: implement ALLSYMS feat of CMake version
  • #12011 cmake: init protected-mode for CMake build
  • #12201 cmake/export: fix kernel mode app building
  • #12312 cmake/romfs: separate c flags to avoid compile fail
  • #12016 openamp/cmake: sync with libmetal.defs
  • #12017 risc-v/cmake: revision for kernel mode
  • #12023 virtio/cmake: sync with makefile system Architectural Support New Architecture Support
  • #12441 arch/arm/cxd32xx: Add cxd32xx SoC support
  • #12350 arch/arm/stm32h7: add stm32h755II chip
  • #12394 arch/arm/stm32h7: add stm32h755II chip Architecture improvements
  • #12281 arch: smp optmization
  • #12457 arch: add LDC2 (dlang) support
  • #12378 types: on some arch, execution speed can be accelerated

  • #12136 arch/kconfig: minor revision for ARCH_KMAP_NPAGES
  • #12154 arch/kconfig: revise kernel mapping configs

  • #12494 arch/arm: Fix SHMODULEFLAGS so that we link dynamically correctly
  • #12401 arch/arm: Rename CONFIG_MPU_RESET -> CONFIG_ARM_MPU_RESET so the the MPU reset so it is compiled
  • #12047 arch/arm/am335x: Fix incorrect signedness of variable
  • #12442 arch/arm/armv7-m/arm_vectors.c : Add the address alignment.
  • #12379 arch/arm/armv6/7/8-m: use ISB instruction immediately after the MSR instruction
  • #12366 arch/arm/imxrt: 1170 MPU config ensure no lockups can occur
  • #12268 arch/arm/imxrt:Add DMA preflight Support
  • #12318 arch/arm/imxrt: lpuart singlewire transfer support
  • #12091 arch/arm/kasan: Implementing global variable out of bounds detection
  • #12227 arch/arm/lpc17_40 i2c: Fix I2C driver state desynchronization.
  • #12239 arch/arm/nrf91: enable FPU
  • #12046 arch/arm/s32k3xx: Fix incorrect check for invalid port or pin number
  • #12235 arch/arm/mx8mp: add rptun/rpmsg client support
  • #12018 arch/arm/qemu/armv7a: add Symmetric Multi-Processing (SMP) support
  • #12138 arch/arm/qemu/trustzone: add secure memory config
  • #12417 arch/arm/samv7: add support for user signature area in embedded flash
  • #12255 arch/arm/samv7: build sam_qencoder.c only if at least one timer counter is enabled
  • #12131 arch/arm/sama5: Improvements relating to SAMA5 TSD driver
  • #12382 arch/arm/samv7: enforce compilation error for incompatible configuration options
  • #12392 arch/arm/samv7: fix U(S)ART clock enable for 1-wire
  • #12393 arch/arm/samv7: remove duplicated prototypes
  • #12077 arch/arm/samv7/sam_pwm.c: adjust arch driver to DCPOL options
  • #12306 arch/arm/samv7/sam_pwm.c: option to make channels synchronous
  • #12081 arch/arm/samv7/sam_qencoder.c: add support for GETINDEX ioctl call
  • #12247 arch/arm/samv7/sam_pwm.c: option to enable only the L PWM outputs
  • #12538 arch/arm/stm32h7: allow Ethernet MAC without PHY
  • #11933 arch/arm/stm32f7: Add support to I2S Audio inteface using I2S/SPI peripheral
  • #11990 arch/arm/stm32h7: Serial Fix Logic error in up_dma_txavailable
  • #12145 arch/arm/stm32h7/linum-stm32h753bi: Add support to littlefs and nxffs
  • #11996 arch/arm/stm32h7/linum-stm32h753bi: Add FDCAN support
  • #12014 arch/arm/stm32h7/linum-stm32h753bi: add support to leds
  • #12083 arch/arm/stm32h7/fdcan: fixed kconfig and debug register
  • #12093 arch/arm/stm32h7/stm32_i2c: fix sending large data over i2c
  • #12105 arch/arm/stm32f76xx77xx_rcc: Fix PLLI2S factor divisors
  • #12470 arch/arm/xmc4 uart driver fix
  • #12425 arch/arm/xmc4 vadc driver - background request source partial support
  • #12482 arch/arm/xmc4 vadc driver - background request source partial support (linked to #12425)
  • #12352 arch/arm/mxc4/XMC4800 improve EtherCAT support

  • #12049 arch/arm64: Add -mcpu=cortex-a55
  • #12146 arch/arm64: Add atomic modifyregXX
  • #12524 arch/arm64: add DSB ISB where necessary
  • #12523 arch/arm64: add poweroff
  • #12525 arch/arm64: align stack pointer and misc update
  • #12521 arch/arm64: Change the ARM configuration name to ARM64
  • #12353 arch/arm64: EL3 runtime support
  • #12327 arch/arm64: optimise for arm64_switchcontext
  • #12526 arch/arm64: use serr for error log
  • #12160 arch/arm64/imx9: Add a more capable uart driver
  • #12228 arch/arm64/imx9: Add DMA memory allocator
  • #12183 arch/arm64/imx9: Add eDMA driver
  • #12273 arch/arm64/Imx9: Add ethernet driver
  • #12034 arch/arm64/imx9: Add GPIO and IOMUX drivers
  • #12149 arch/arm64/imx9: Add LPI2C driver
  • #12164 arch/arm64/imx9: Add LPSPI driver
  • #12213 arch/arm64/imx9: Add PSCI (system reset) support
  • #12292 arch/arm64/imx9: Add uSDHC driver
  • #12054 arch/arm64/Imx9: lptpm pwm
  • #12048 arch/arm64/Imx9: flexio pwm
  • #12051 arch/arm64/Imx9: usbdev driver
  • #12170 arch/arm64/imx9/imx9_boot.c: Add initialization of pin interrupts
  • #12229 arch/arm64/imx9/imx9_clockconfig: Add way to change and ask for PLL frequency
  • #12059 arch/arm64/imx9/imx9_flexio_pwm.c: Fix wrong input scale
  • #12161 arch/arm64/imx9/imx9_iomux.h: Fix issues with the header file
  • #12182 arch/arm64/imx9/imx9_usbdev.c: Fix the descriptor alignments and …
  • #12428 arch/arm64/imx9/Imx93 base addr
  • #12148 arch/arm64/imx9/imx93_gpioirq: Fix the GPIO interrupt source names

  • #12305 sim: add sqlite configuration
  • #12431 sim: Allow the sim to set the MTU of netdevice and support the jumbo frame.
  • #12167 sim: Modify the existing implementation of the simwifi script
  • #12088 sim/kconfig: select ARCH_TOOLCHAIN_GNU

  • #12172 arch/risc-v: add LLVM clang support
  • #12176 arch/risc-v: add llvm experimental extensions into command line
  • #12118 arch/risc-v: Add more debug related CSR definitions
  • #12488 arch/risc-v: Add support for S-mode flat build
  • #12506 arch/risc-v: Add support for SOPHGO SG2000 SoC (T-Head C906)
  • #12184 arch/risc-v: add support of save/restore vector registers
  • #12125 arch/risc-v: add T-HEAD CSR mapping
  • #12174 arch/risc-v: Add Vector CSRs to csr.h
  • #12265 arch/risc-v: assign idlestack array statically
  • #12398 arch/risc-v: Check that the size is valid for NAPOT
  • #12261 arch/risc-v: correct minor issues regarding comments
  • #12220 arch/risc-v: decouple Per-CPU scratch with ARCH_USE_S_MODE
  • #12296 arch/risc-v: esp32_c3/pm: Fix assert issue in PM mode
  • #12396 arch/risc-v: Feature/esp rtc io
  • #12236 arch/risc-v: fix break on kernel mode
  • #12326 arch/risc-v: fix idle stack assign order
  • #12132 arch/risc-v: fix RV32 addrenv destroy issue
  • #12117 arch/risc-v: force using encoding macro for CSR access
  • #12389 arch/risc-v: guard tcb->name usage
  • #12250 arch/risc-v: implement SBI ipi extension
  • #12527 arch/risc-v: Improve the SBI function handle
  • #12288 arch/risc-v: Make bl602 allocate idle stack after ebss
  • #12295 arch/risc-v: Make esp32 SoCs allocate idle stack after ebss
  • #12543 arch/risc-v: move PRIxREG to inttypes.h
  • #12534 arch/risc-v: New CSRs about CLIC support for RISCV
  • #12207 arch/risc-v: remove the hard code array of cpu idle stack
  • #12200 arch/risc-v: rename local variable name to avoid shadowed declaration
  • #12232 arch/risc-v: replace atomic operations to AMO
  • #12522 arch/risc-v: revise mtimer for rv64ilp32
  • #12504 arch/risc-v: revise MMIO for rv64ilp32
  • #12475 arch/risc-v: support rv64ilp32 ABI
  • #12542 arch/risc-v/bl808: Add courier system driver
  • #12036 arch/risc-v/espressif: Fix empty cpuint number
  • #12486 arch/risc-v/esp: Make the legacy bootloader (IDF bootloader) option visible
  • #12450 arch/risc-v/esp32[c3]: Add XTWDT support
  • #12337 arch/risc-v/esp32[c3 c6]: Add support for Wi-Fi
  • #11992 arch/risc-v/esp32[c3 c6 h2]: Fix filesystem test support
  • #12044 arch/risc-v/esp32[c3 c6 h2]: Fix RTC data placement
  • #12163 arch/risc-v/esp32[c3 c6 h2]: Fix simple boot map_rom_segments
  • #12485 arch/risc-v/esp32[c3 c6 h2]: Add gspi master support
  • #12495 arch/risc-v/esp32[c3 c6 h2]: Add SPI Slave support
  • #12104 arch/risc-v/esp32[c3 h2 c6]: Bugfixes for filesystem errors
  • #12254 arch/risc-v/esp32[c3 h2 c6]: Add support to TWAI/CANBus controller
  • #12429 arch/risc-v/fork.S: Fix clobbering of s0 in fork()
  • #12512 arch/risc-v/include/elf.f: Support coredump for rv32 and rv64 targets.
  • #12430 arch/risc-v/litex/litex_arch_alarm: Support tickless schedular with arch alarm.
  • #12544 arch/risc-v/nuttsbi: add MTVAL argument
  • #12453 arch/risc-v/mpfs: Add error handling for PMP conf
  • #12359 arch/risc-v/mpfs: Change linker symbols _ssbi_ddr and _esbi_ddr into _ssbi…
  • #12276 arch/risc-v/pgmap: Fix bug in kernel page directory init
  • #12279 arch/risc-v/qemu: fix kernel build issue 12275
  • #12290 arch/risc-v/qemu: graceful shutdown via SBI
  • #12178 arch/risc-v/qemu-rv: Add S-mode support
  • #12433 arch/risc-v/riscv_mtimer: Update the mtimecmp value once per interrup…
  • #12535 arch/risc-v/rv64ilp32: revise fpucmp
  • #12435 arch/risc-v/syscall: Optimize user service call performance
  • #12301 arch/risc-v/virt: graceful shutdown in M-mode

  • #12267 arch/xtensa: Fix esp32s3 build warnings
  • #12530 arch/xtensa: Modified ESP32S3 chip names and added “ARCH_CHIP_ESP32S3CUSTOM” chip module
  • #12323 arch/xtensa: Zero-Cross driver to ESP32
  • #12030 arch/xtensa/esp32: Use the Espressifs common RMT driver.
  • #12328 arch/xtensa/esp32[ s2 s3]: Fix D_I_BUS_OFFSET
  • #12003 arch/xtensa/esp32[ s2 s3]: Update libc stubs to properly acquire/release locks
  • #12399 arch/xtensa/esp32[ s2 s3]: textheap: do not require RTC heap
  • #12006 arch/xtensa/esp32s3: Add 16-byte-align SPI-Flash encryption write
  • #12355 arch/xtensa/esp32s3: Add a few optional text heap APIs to support esp32s3
  • #12269 arch/xtensa/esp32s3: add a variation with 32MB flash
  • #12289 arch/xtensa/esp32s3: Add ESP32-S3 ADC driver
  • #12007 arch/xtensa/esp32s3: Add ESP32-S3 AES driver
  • #12217 arch/xtensa/esp32s3: Add missing entries to iram.text from legacy_sections.ld
  • #12165 arch/xtensa/esp32s3: add simple boot support
  • #12447 arch/xtensa/esp32s2: add simple boot support
  • #12076 arch/xtensa/esp32S3: configuring gpio pin 19 or 20 ( USB_D+/- ) for purposes other than USB/JTAG Controller and I2S pin selection range fixed
  • #12264 arch/xtensa/esp32s3: give ESP32S3_APP_FORMAT_LEGACY a prompt
  • #12043 arch/xtensa/esp32s3: Fix duplicate definition warnings
  • #12008 arch/xtensa/esp32s3: Fix one page program span over 2 pages
  • #12334 arch/xtensa/esp32s3: make textheap return i-bus address consistently
  • #12332 arch/xtensa/esp32s3: pending interrupt should be clear while disable GPIO IRQ
  • #12222 arch/xtensa/esp32s3: Support ESP32-S3 PM standby and sleep.
  • #12348 arch/xtensa/esp32s3: textheap.c: fix range checks
  • #12004 arch/xtensa/esp32s3: Update wireless drivers
  • #12505 arch/xtensa/esp32s3/Bootloader.mk: Correction for MCUBoot Version Config Variable

  • #12364 arch/espressif: Add option to disable the GIT_DEPTH to pull submodules

  • #12206 arch/x86_64: add simple ACPI parser
  • #12234 arch/x86_64: enable CUSTOMOPT
  • #12205 arch/x86_64/intel64: add cache support
  • #12204 arch/x86_64/intel64: various cosmetic changes
  • #12225 arch/x86_64/x86_64_acpi.c: avoid debug messages in acpi_init()
  • #12214 arch/x86_64/x86_64_acpi.c: cosmetic changes after review
  • #12210 arch/x86_64/x86_64_acpi.c: make sure that RSDP is mapped

Driver Support New Driver Support

  • #12191 drivers/sensors: add support for bmm150 magnetometer
  • #12193 drivers/sensors: add support for adxl362 accelerometer
  • #12329 drivers/video/V4l2m2m Drivers With Improvements
  • #12531 drivers: add note when driver registers
  • #12139 drivers: There is no need to use sched_[un]lock
  • #12473 drivers/1wire: update pm callback use container_of
  • #12411 drivers/analog: add configuration option to set DAC FIFO size
  • #12143 drivers/analog: enable support for multible devices of mcp48xx
  • #11940 drivers/devicetree: Add a set of commonly used FDT utilities.
  • #12405 drivers/devicetree/fdt: add additional fdt parsing utilities
  • #12519 drivers/can/sja1000: fix cmd register write
  • #12507 drivers/can/sja1000: fix Rx buffer pointer issue
  • #12084 drivers/filemtd supports Nand-like file systems
  • #12058 drivers/ioexpander/icjx: add support for change of input interrupts on NINT
  • #12311 drivers/ioexpander/icjx: use iC-JX interrupt config instead of the general one
  • #12367 drivers/misc/fix: call rwb->rhreload() when nblocks > 0
  • #12188 drivers/misc/fix: the bug about rwbuffer causing mem overflow
  • #12202 drivers/misc/rwbuffer: fix rwbuffer overflow issue
  • #12317 drivers/mmcsd/mmcsd_sdio.c: Fix SD card 4-bit support
  • #12042 drivers/net/lan9250: Fix crash issue of sending packets by lan9250 driver under SMP and multi-thread
  • #12120 drivers/power/pm: Fix warning of type cast
  • #12233 drivers/serial: mps3-an547:support nuttx run qemu(cortex-m55)
  • #12177 drivers/serial/16550: remove unused function
  • #12443 drivers/serial/pl011: add the interface about clock and reset control.
  • #12262 drivers/serial/pl011: configurable clock frequency
  • #12369 drivers/sensors: improvements for bmm150 and bh1749nuc
  • #12240 drivers/sensors: various fixes for sensors
  • #12258 drivers/sensors/Kconfig: Added if SENSORS_BME680 for common dependency
  • #12192 drivers/sensors/adxl372: add support for the new sensor framework
  • #12190 drivers/sensors/bh1749nuc: add support for the new sensor framework
  • #12189 drivers/sensors/bmi270: add support for the new sensor framework
  • #12513 drivers/sensors/bmi270: fix bmi270_uorb build
  • #12244 drivers/sensors/bmi270_uorb.c: move init sequence to register function
  • #12012 drivers/spi: Add support for FPGA iCE40 bitstream loading.
  • #12341 drivers/tun: add tx packets dump
  • #12413 drivers/timers/mcp794xx: store datetime in UTC and add trimming support
  • #12474 drivers/timers/watchdog: fix idle callback maybe not upperhalf
  • #12198 drivers/usbdev: fix complile break about mtp class
  • #12199 drivers/usbdev/cdcacm: simply cdcacm uninitialize flow and fix double issue
  • #12197 drivers/usbdev/fs: fix issue between adb/fastboot/mtp and usbdev fs
  • #12539 drivers/video: fix code scan
  • #11995 drivers/video: Make the I2C access more efficient
  • #11994 drivers/video/isx019: Fix default_value of 3A status
  • #11999 drivers/video/isx019: Fix the default_value of some parameters
  • #12024 drivers/virtio/gpu: minor revision on virtio_gpu_send_cmd()
  • #12330 drivers/vnc:fix vnc kbd assert cause by wrong data conversion
  • #12390 PM: add stability governer
  • #12351 PM: change domain field state after callback done
  • #12503 pm: change pm lock from mutex to spinlock
  • #12400 pm: do struct timespec copy to decrease api call times.
  • #12357 pm: fix when RTC_HIRES enabled pm procfs err
  • #12471 pm: make compile dummy when PM not enabled.
  • #12509 pm: pm_runtime fix header
  • #12360 pm: procfs add pm prapare fail stats
  • #12444 pm: remove pm global, make per domain isolated
  • #12540 pm: remove pm_lock spinlock wrapper
  • #12472 pm: shorten the pm procfs domain lock time.
  • #12368 pm_procfs: update state up to now when pm procfs read
  • #12537 pm_runtime: lock use pm_runtime_lock
  • #11987 Video improvement
  • #12135 video: Move video_format_s from video.h to v4l2_cap.c
  • #12238 video/fb: userspace framebuffer support
  • #12286 video/fb: userspace framebuffer updates Board Support New Board Support
  • #12186 Support for W5500-EVB-Pico board
  • #12324 boards/stm32h7: Add initial support to WeAct STM32H743
  • #12528 risc-v/k230: initial rv64ilp32 support Boards With  Improvements
  • #12287 Added support in Nucleo-L476RG board for BMP280 sensor.
  • #12347 Added support in Nucleo-L476RG board for MPU9250 sensor.
  • #12373 Fixed collision between CAN1 and I2C1. Board nucleo-l476rg.
  • #12384 XMC4800 fix config board.h
  • #12440 boards: cxd56xx: Fix read position in cxd5610 gnss driver
  • #12038 boards: Fix board configs after disabling NSH_DISABLE_HELP
  • #12410 boards: Kconfig esp32c3, esp32 and esp32s3 corrected PM block
  • #12028 boards: rp2040: Fix build errors for nshsram configurations
  • #12420 boards/raspberrypi-pico: Add support to BMP280
  • #12025 boards/raspberrypi-pico: Fix nshsram build error
  • #12448 boards/raspberrypi-pico: Remove early return for error cases in initialization functions.
  • #12403 boards/arm/stm32: Add support to transparent OLED SSD1309
  • #12371 boards/arm/stm32: Stm32f401rc rs485 hcsr04
  • #12241 boards/arm/stm32/common/src/stm32_bh1750.c: fix include
  • #12370 boards/arm/stm32h7/linum-stm32h753bi: add support to ethernet connection
  • #12248 boards/arm/stm32h7/linum-stm32h753bi: Add support to rndis(etherver over usb)
  • #12272 boards/arm/stm32h7/linum-stm32h753bi: Add support to usbmsc with sdcard
  • #12082 boards/arm/stm32h7/linum-stm32h753bi: add support to zmodem
  • #12039 boards/arm/stm32h7/linum-stm32h753bi: fixed leds example
  • #12162 boards/arm64/imx9/imx93-evk/src/imx9_pwm.c: Fix initialization of TPM…
  • #12358 boards/arm64/imx93-evk: Fix potential warning about unused variable
  • #12021 boards/control: add irq affinity control
  • #12166 boards/stm32: Fix ds1307 and move it to stm32/common
  • #12245 boards/stm32f103-minimum: fix i2c driver register
  • #12257 boards/stm32f401rc-rs485: Add support to Mass Storage
  • #12246 boards/stm32f401rc-rs485: Add support to RNDIS
  • #12483 boards/thingy53: add sensors support
  • #12510 boards/risc-v: Add support for Milk-V Duo S SBC (SOPHGO SG2000 SoC)
  • #12408 boards/risc-v/litex/arty_a7/Kconfig: Added if LITEX_SDIO for common dependency
  • #12365 boards/risc-v/mpfs/common/src: Update mpfs_emmcsd.c and mpfs_composite.c
  • #12372 boards/risc-v/rv-virt: Use config to compute memory layout for kernel build
  • #12308 boards/risc-v/rv-virt/configs: enable debug features
  • #12155 boards/risc-v/rv-virt/knsh32: enable debugging options
  • #12304 boards/xtensa: update esp32-devkitc/wamr_wasi_debug
  • #12310 boards/xtensa/esp32s3: Limit MTD partition size according to the flash size and revert “esp32s3: give ESP32S3_APP_FORMAT_LEGACY a prompt
  • #12256 boards/xtensa/esp32/lvgl: fix lvgl v9 configuration error

Networking Improvements

  • #12215 Netlink route support
  • #12080 net: Fix max conn always one less than configured value
  • #12487 net: fixed bind can not return error when used same addr.
  • #12454 net: Enable CONFIG_NET_ARP_SEND by default
  • #12110 net: Make TCP/UDP max & min port customizable
  • #12129 net: Optimize TCP/UDP port selection
  • #12508 net: Support packet filter (firewall) and corresponding iptables/ip6tables
  • #12338 net/icmpv6: fix resource leak of icmpv6
  • #12452 net/inet: Rename ttl to s_ttl in sconn
  • #12251 net/ipv6: Optimized the ipv6 sending of the Layer 3 NIC
  • #12340 net/ipv6/netlink: add netlink report when get ipv6 address by icmpv6
  • #12465 net/can: Add SO_RCVBUF option for can socket
  • #12089 net/can: deliver data into multiple CAN conn bound to same dev
  • #12344 net/netdev: Check quota when registering lower-half devices
  • #12203 net/netdev_upperhalf: add L3 packet handle
  • #12221 net/netfilter: Correction of header files
  • #12156 net/netlink: Add NETLINK_NETFILTER’s CONNTRACK support
  • #12458 net/netlink: fix IPV6 macro bug
  • #12130 net/nat: Minor code optimizations
  • #12107 net/nat: Slightly optimize the IPv4 NAT
  • #12116 net/nat: Support IPv6 Masquerading (NAT66)
  • #12085 net/nat: Support Symmetric NAT
  • #12339 net/route: fix Mico definition bug
  • #12253 net/tcp: decouple TCP_NODELAY and NET_TCP_KEEPALIVE
  • #12391 net/tcp: fix tcp will not close when tcp retransmission reaches TCP_MAXRTX
  • #12342 net/udp: fix udp wrb-iob leak when NIC was down
  • #12015 net/udp: Slight improvement on multicast
  • #12212 net/udp_input: Only dup packets for broadcast / multicast.