Nordic Thingy:91
The Thingy:91 (PCA0035) is a development board based on the nRF9160 and nRF52840 from Nordic.
Peripheral Support
Peripheral |
Support |
NOTES |
|---|---|---|
UART |
Yes |
|
Modem |
Yes |
|
GPS |
No |
|
Buttons |
Yes |
|
LEDs |
No |
|
COEX |
No |
|
PMIC (ADP5360) |
No |
I2C 0x46 |
Battery monitoring |
No |
|
Buzzer |
No |
|
EEPROM (24CW160) |
No |
I2C 0x50 |
Low power accelerometer (ADXL362) |
No |
SPI |
Hi G accelerometer (ADXL372) |
No |
SPI |
Air quality sensor (BME680) |
No |
I2C 0x76 |
Color sensor (BH1749NUC) |
No |
I2C 0x38 |
Serial Console
Console over RTT UART
Access to UART0 console over USB connected to nRF52840. MCU_IF0 and MCU_IF1 pins are used to communicate between MCUs.
Configurations
thingy91_rtt
Configuration with a console over RTT, enabling available peripherals on the board (WIP).
Flash & Debug
Both flashing and debuing is possible only with an external debug probe.