Nordic nRF5340-Audio-DK

The nRF5340-Audio-DK is a development kit dedicated for Bluetooth LE Audio application based on the nRF5340 from Nordic.

Peripheral Support

Peripheral

Support

NOTES

UART

Yes

QSPI

No

Buttons

No

LEDs

No

USB

No

SD Card

No

NFC

No

PDM Microphone (VM3011)

No

Audio DSP (CS47L63)

No

Serial Console

Serial console for the application core:

Pin

Signal

Notes

P1.05

APP UART0 TX

virtual COM 0

P1.04

APP UART0 RX

virtual COM 0

Serial console for the network core:

Pin

Signal

Notes

P1.09

NET UART0 TX

virtual COM 1

P1.08

NET UART0 RX

virtual COM 1

LEDs and Buttons

LEDs

The nRF5340-Audio-DK has 4 user-controllable LEDs:

LED

MCU

LED1

P0.31

LED2

P1.01

LED3

P1.02

A low output illuminates the LED.

CONFIG_ARCH_LEDS

If CONFIG_ARCH_LEDS is not defined, then the LEDs are completely under control of the application. The following interfaces are then available for application control of the LEDs:

uint32_t board_userled_initialize(void);
void board_userled(int led, bool ledon);
void board_userled_all(uint32_t ledset);

Pushbuttons

BUTTON

MCU

BUTTON1

P0.02

BUTTON2

P0.03

BUTTON3

P0.04

BUTTON4

P0.05

BUTTON5

P0.06

Configurations

Each configuration is maintained in a sub-directory and can be selected as follow:

tools/configure.sh nrf5340-audio-dk:<subdir>

Where <subdir> is one of the following:

nsh_cpuapp

Basic NuttShell configuration for the application core (console enabled in UART0, exposed via J-Link VCOM0, at 115200 bps).